Legrand 364714-08 - Manual

1. Introduction
The Mounting Plates are to be used with various Ademco Group control panels. The Mounting Plates are for
installation of the Ademco control panel into the OnQ 14”, 28” and 42” Tri-rail or Flat-rail Service Center
Enclosures. The enclosures are UL listed as “Household Fire and Burglary Warning System Control Unit
Enclosures”, reference File Number S7106.
2. Descriptions
The Mounting Plates allow Ademco control panels to be utilized in an OnQ Structured Wiring System.
Reference chart below:
OnQ Technologies, Inc.
P.O. Box 60907
Harrisburg, PA 17106-0907
800-321-2343
www.onqtech.com
Installation/Instruction Sheet
OnQ ADEMCO Group
Mounting Plates
IS-0255 Rev. O
IS-0255 Rev. O Page 1 of 2
Ref. P/N 363605-88
8 Bit Plate
H = 8.9”
Universal Plate
H = 8.9”
Universal Plate
H = 6.9”