Legrand 364412-01 - Manual

301 Fulling Mill Road, Suite G
Middletown, PA 17057
Phone (800) 321-2343 / Fax (717) 702-2546
www.onqlegrand.com
Page 1 of 1
INSTRUCTION/INSTALLATION SHEET
Video Terminator
IS-0119 REV. A
©Copyright 2008 by On-Q/Legrand All Rights Reserved .
1. Introduction
The On-Q/Legrand Video Terminator, P/N 364412-01
(see Figure 1) is a 75 ohm coaxial terminator used on all
un-terminated RG-6 RF video runs to eliminate any
possible interference.
2. Description
The On-Q Video Terminator provides impedance matching end-of-line 75 ohm loads for those RG-6 coaxial
RF video connections left un-terminated at installation. This impedance matching preserves picture quality
and clarity while eliminating any possible ingress interference at the connector. They are supplied as a bag of
ten individual video terminators.
3. Installation
A. For any unused RF video connections at outlets or on Video Distribution Modules which are not self-
terminating, simply screw the Video Terminator onto the unused connection until firmly in place (see
Figure 2).
Figure 1
Figure 2