Legrand VM7632 - Manual

INSTRUCTION / INSTALLATION SHEET
2X2 Enhanced Bi-Directional Video
Amplifier Module
IS-0345 Rev. B
301 Fulling Mill Road, Suite G
Middletown, PA 17057
Phone (800) 321-2343 / Fax (717) 702-2546
www.onqlegrand.com
©Copyright 2006 by On-Q/Legrand All Rights Reserved. Page 1 of 2
Figure 1
Figure 2
1. INTRODUCTION
The On-Q/Legrand 2X2 Enhanced Bi-Directional Video Amplifier Module
(P/N VM7632) (see Figure 1) handles up to 9 inputs and 16 outputs when
installed with a 4, 6, or 8-way video module.
2. DESCRIPTION
The Modular Video Amplifier is designed to distribute modulated internal
video signals and external video sources throughout the home. Combined
inputs are amplified to negate losses to the split outputs.
• Single bay horizontal mounting bracket (P/N AC1007) included for
mounting in On-Q style enclosure (see Figure 2)
• Bi-Directional amplifier which supports cable modem, digital
cable and video on demand
• Provides a 2nd input for internal signals.
• High gain amplifier that delivers quality signal to up to 8 TV
locations when coupled with add-on splitters such as
the On-Q/Legrand 1x4, 1x6 or 1x8 Passive Video Modules
• A manually adjustable attenuation circuit allows amplification of
video signals without noticeable degradation of signal quality while
connected to a +30dBmV CATV/ANT external input
3. POWER REQUIREMENTS
The 2X2 Bi-Directional Video Amplifier Module's power requirements are:
• Voltage: +12 VDC
• Current: 250 mA
• Power: 3 W Max
• Polarity: Tip (+) Barrel (-)
Note: On-Q/Legrand offers several options for power, which range from a dedicated power cube designed to
accommodate one module to power solutions designed to accommodate multiple module installations.
Please refer to the On-Q/Legrand Catalog or the On-Q/Legrand website (http://www.onqlegrand.com) for more
information.