Terminating cat 5 cable, How to step-by-step cont – Legrand AC345050 User Manual
Page 2
301 Fulling Mill road, suite g
Middletown, Pa 17057
(800) 321-2343
©2012 by Legrand. all rights reserved.
www.legrand.us/onq
Terminating Cat 5 Cable
3.
How To sTep-by-sTep CoNT.
Step 4
Lightly pinch the wires together to
prepare for seating.
Step 5
confirm that the colors match the t568a
pattern and trim so that all of the wires
line up to fit in the rJ45 connector.
Step 6
slide the cable into the connector
ensuring that:
only one wire goes into each seat
the pins reach the end of the connector
the gold pin ends are neatly aligned
the jacket is inside of the connector
Step 7
insert the connector into the crimp tool
and squeeze to set each of the pins.
Step 8
ensure that all eight gold pins are fully
compressed.
Step 9
We recommend that you always test the
cable for continuity – simply plug each
end into the tester and look for the green
light on each tested pair.