Leprecon LD-360 MPX Series - Manual (Page 3)

3
Specifications
Power Capacity
The LD360 MPX is unique in the market of small portable dimmers. A single breaker is used
on the pack instead of individual fuses per each channel. As a result, the limits of the dimmer
are pack limits, not channel limits. The following guidelines should be followed:
LD360 MPX:
Pack Limit: 15 Amps
20 Amps with approved plug.
LD360 MPX-HP
Pack Limit: 15 Amps per line cord.
As indicated, the total pack power of the LD360 MPX can be increased to 20 amps by
changing the factory supplied 15 amp power plug to a type approved for the higher power.
Some of the choices are:
Plug Mating Socket Type
Nema 5-20P Nema 5-20S “Tee Blade”
Hubbel 5364VY Hubbel 5369VY
Hubbel 5366C Hubbel 5369C
Nema L5-20P Nema L5-20S Twist Lock
Hubbel 2311VY Hubbel 2313VY
Hubbel 2311 Hubbel 2311
Control input
The LD360 MPX uses a multiplexed control signal that is common in the industry, The Microplex
signal is carried on standard 3 pin XLR (microphone) cable, allowing the use of audio cables for
dimmer connection. Simply connect a 3 pin microphone cable between the console being used
and the LD360 MPX dimmer control input.
For convenience, two connectors are provided on the LD360MPX. This allows easy connection
to additional dimmer packs.