Canon A3000 IS - Manual (Page 86)

86
Changing the Image Quality
You can choose between three image quality settings.
1
Choose the image quality setting.
● After pressing the m button, press the op
buttons to choose .
2
Choose an option.
● Press the qr buttons to choose an option,
and press the m button.
X The setting will display on the screen.
Image Quality Table
Estimated Shooting Time
• Based on Canon’s testing standards.
• Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
Image Quality
(Recording Pixels/Frame Rate)
Content
640 x 480 pixels, 30 frames/sec. For shooting standard quality movies.
640 x 480 pixels, 30 frames/sec. LP
The image quality will appear coarse when
compared with
, but you can record
twice the length.
320 x 240 pixels, 30 frames/sec.
Since the number of the recording pixels is
smaller, the image quality will appear
coarse when compared with
, but you
can record three times the length.
Image Quality
Shooting Time
4 GB 16 GB
32 min. 26 sec. 2 hrs. 12 min. 50 sec.
1 hr. 2 min. 51 sec. 4 hrs. 17 min. 23 sec.
1 hr. 31 min. 25 sec. 6 hrs. 14 min. 23 sec.
CO
PY