Louroe Electronics TLSP-PB-WF - Manual

INTRODUCTION (Refers to both TLSP-PB-WS and TLSP-PB-WF)
Model TLSP-PB is a vandal resistant call station designed to provide 2-way communication with a Louroe sound
activated alarming base station (Models DG-12II/DG-25III). It is designed for correctional facilities or areas of high
vandalism.
The unit consists of an electret condenser microphone, 3” (7.6cm) speaker and a vandal resistant callbutton, all mounted
to an 11 gauge stainless steel faceplate. When the TLSP-PB is interfaced with a Louroe sound activated base station,
the system can be activated either by a noise (scream, yell, etc.) that exceeds the threshold level, set at the base station
or by pressing the built-in call button. The call button sends a 3kHz tone that activates the base station, opening up a
two-way communication path. Included is a 6” x 6” x 4” (15cm x 15cm x 10cm) back box with tamper proof hardware.
Model TLSP-PB-WF is for flush mounting to a wall. Face plate dimensions are 7” x 7” (18cm x 18cm)
Model TLSP-PB-WS is the surface mounting to a wall. Face plate dimensions are 6” x 6” (15cm x 15cm)
MODEL TLSP-PB-WF/TLSP-PB-WS
REMOTE CALL STATION
INSTALLATION AND OPERATING INSTRUCTIONS
6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: (818)994-6498 / FAX: (818)994-6458
/ www.louroe.com [email protected]
®
Page 1 of 4
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818) ®
tlsp_pb_inst_3/15
MODEL TLSP-PB-WF MODEL TLSP-PB-WF
(FOR FLUSH MOUNTING) (FOR SURFACE MOUNTING)