Louroe Electronics MS-2-REC - Manual (Page 4)

V APPLYING POWER TO THE MS-2-REC SYSTEM
A 12Vdc, 500mA power supply is included with MS-2-REC. Cut off the small plug of power supply
and separate the two wires a couple of inches. The black jacket wire with a white stripe is
negative, the solid black jacket wire is positive.
1) Positive wire connects to Pin A of MS-2-REC
2) Negative wire connects to Pin C of MS-2-REC
(shared with microphone ground)
INSTALLATION AND OPERATING INSTRUCTIONS
Page 4 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818) ®
ms-2rec_inst_4/15
SPECIFICATIONS
Supply Voltage
Switch contact
Dimensions
Faceplate
12Vdc
9A @125Vac
Weight
Shipping Weight
8 oz
1 lb
4 9/16” L x 4 9/16” W
303 Stainless Steel
Backbox Two gang electrical
box (not included)