LSC Lighting MDR Splitter - Manual (Page 4)

MDR DMX512/RDM Data Splitter Operator Manual
Page 2 LSC Lighting Systems (Aust) Pty Ltd.
Getting Connected
For the purpose of this section only the MDRT Portable 5-way model is shown with all
options fitted. Please note that the MDRX 10-way model cannot have the Wireless DMX512
option fitted.
Truss Mounting
The MDRT splitters can be mounted to truss, handrails and pipes using two methods. The
first method is with two Velcro straps, supplied with the splitter that can be looped through
the end cavities of the plastic housing and wrapped around the truss or pipe.
The second method is a factory supplied option, consisting of a metal bracket and fixing
bolts, that allows the splitter to have a coupler or hook clamp attached.
For either method it is recommended to feed a suitably rated safety wire/chain through the
end cavities of the splitter and fasten around the pipe/truss/handrail.
Fuseholder
0.5 Amp
rated fuse.
Recessed cavity
for storing aerial
when not in use.
Standard
IEC input
connector
Optional
Powercon
input.
RDM
Priority
LED
Curved End
pieces for
fastening to
truss pipe
DMX512
Output
Connectors
DMX512
Priority
LED
RDM
Enable
Switch
End-of-Line
DMX512
Termination
Switch & LED
DMX512
Pass-Thru
Connector
DMX512
Input
Connector
MDR
Status
LEDs
Supplied
Velcro
Straps
Optional
Clamp
Bracket