Lumens Technology Ladibug PC - Manual (Page 7)

6
4. Connection
4.1. Connect the power cord of the Visual Presenter.
<Note> Appearance of power cord and AC outlet may vary with countries/regions.
4.2. Turn on the Visual Presenter by pressing the [POWER] button on the unit or the remote
control for several seconds. When the light next to the power button is lit, the unit is ready to
use.
4.3. Connect USB cable to the Visual Presenter and your computer.
4.4. Install the USB driver (For specific models only)
4.4.1. The installation wizard pops up. Select “No, not this time” for the next step.
4.4.2. Select “Install the software automatically (Recommended)” for the next step.
AC Outlet
<Very Important> To ensure successful installation, please make sure each of the
following steps is completed