Lumens Technology VMS - Manual (Page 6)

5
3. Start Using
3.1. Open LUMENS VMS
3.2. Search Camera
3.2.1. Automatic Search: Click [Search]
<Remark> When using automatic search, the camera and computer must be in the
same network segment, e.g.: 192.168.1.x
3.2.2. Manual Search: Enter the known IP Add. of the camera, and then click to add the
camera into the list
3.2.3. If firewall warning occurs in the first use, please check the [LAN] and then press [Allow
access].
 Safety Alert: Click [Unblock].
/
3.3. Click on an IP Add. available in the list, and enter the default User Name/Password of the
camera for connection