MacroSystem Bogart SE Ver.3 - v3.2c Release Notes - Manual (Page 3)

-When importing a long series of clips via AVCHD, it could auto split incorrectly and have a
starting frame of the last frame of the prior split scene. If this occurs, use the option in the
"Settings" menu called "Record, Playback". There will be sliders to adjust the AVCHD In and Out.
You can adjust the In or Out by a frame or two and then go back to your original AVCHD scene
and auto split it again.
-After a new installation, the Media Manager side will display a list of some new products in the
Install Product menu. Relaxvision and Expert Package should auto activate for you. Other than
those, the Premium Package would be the only add on program you need to activate. Many of
the other programs are simply not available yet or only for the European "Enterprise" DVR
systems.
-There are some variables that can affect playback of AVCHD (DVD) discs when using the
Arabesk 4.9 version. HD Projects using the format of 1440x1080i should work well with a
"Normal" quality setting in Arabesk. With a HD project format of 1920x1080, we recommend
one of two methods for rendering the AVCHD (DVD). Method #1- The faster method, requires
the original AVCHD material to be imported in a designated 1440x1080 project first for
accelerated rendering in AVCHD (DVD) mode. Then use "Normal" quality setting or above in
Arabesk. Method #2 - Import the original AVCHD material to the scene bin in the 1920X1080i
format and then using the "Good" setting in Arabesk 4.9 for rendering an AVCHD (DVD) disc.
However, this method does have an extremely long rendering time for moving the data into
Arabesk with these settings.
INSTALLATION INSTRUCTIONS
1. When the system is booted on, simply eject the DVD tray and put in the Bogart Operating
System CD.
2. Shut the machine down normally with the Off button or a Force Shut Down (if needed).
3. Wait a few seconds, and then reboot the machine. The system will start up and after a minute
or so start accessing the burner and reading the disc. A prompt will then come on the screen to
indicate the system is being analyzed. Wait until the next install screen comes up.
4. The next screen will give you the options to do what is called the update or the installation.
The update is just going to reset or add corrections to the software section and leaves the video
and audio elements current. The update process will be fairly short maybe around a couple of
minutes or so. If you choose the Installation button, a second message will appear to warn you
that all files will be cleared . (If you plan to do a new full installation, be sure you have backed
your projects up to tape or to an external drive. This will clear off all data on the drive. We
recommend doing a full install of software from time to time if you are able.) Go ahead and
accept this choice and the system will re-install. An install process will take about 10 minutes.
5. When either process is done, the tray will pop out and you can remove the CD. Click on the
return key on the keyboard to close the tray door. The system will shut down.
6. Now you can reboot and get to the main menu. If you did the full install, then you will need to
enter the code for Bogart SE in the Install Product menu before you can continue on and re-
activate other codes or start reloading footage.