MacroSystem Photo Transfer 1.5 - Manual

Foto-Transfer 1.3
- 1 -
© MacroSystem Digital Video AG
Photo Transfer 1.5
1. Introduction
This expansion is used to load photos of a digital photo camera from and write them to a
photo memory card.
The control elements and their functions are described in brief below.
2. Operation
2.1 Main Menu
After installation, the Photo Transfer program is found in the ÒEditÓ menu under ÒSpecialÓ
and is alphabetically classified.
After choosing Photo Transfer, click on ÒOKÓ, so that a selection menu appears with the
following four buttons:
•
ÒImport from photo memory cardÓ
•
ÒExport to photo memory cardÓ
•
ÒImport for other programsÓ
•
ÒCancelÓ
2.2 Import from photo memory card
Use this menu to import individual photos or all photos from the photo memory card to
the Casablanca as a scene.
The photos on the photo memory card are shown in thumbnail format in the menu,
allowing you to see 18 pictures at the same time.
The following functions are available:
•
ãMemory cardÒ allows you to choose the memory card, from which you want to
import the pictures to your Casablanca. This function is only available, if you are
working with SMART EDIT. It is also only active if you are running the Ò6 in 1 Card
DriveÒ and if the Card Reader is connected. Without this peripheral, the option
ãCasablanca SmartMediaÒ is set to default.
•
ÒLengthÓ: Here you can use a slider control to select the length of the scene that is
to be created from the photo.
•
ÒRotateÓ determines the rotation of the image during import. The photo can be
rotated 90¡ to the left or the right.
•
ÒPicture informationÓ opens a new window with information about the selected
photo.
•
ÒPreviewÓ opens a menu for viewing an enlargement of the selected photo.
•
ÒCancelÓ closes the menu without carrying out a function.
•
ÒAllÓ creates a new scene for each photo on the photo memory card.