MAGICSING ET28KH - Manual (Page 3)

Connecting to HDTV and external
audio output
For video output, follow the same instruction
as 1. above. For audio, use the tri-color RCA cable.
Connect the cable to the audio/video output
on the back part of the main device and
connect Red(right) end and White(left) end
of the cable to corresponding audio inputs on
speakers or other audio devices.
Connecting to TV without a multimedia
high definition input
Connect the Tri-Color RCA cable from the
audio/video output on the back part of
the main device to the corresponding
audio/video inputs on your TV.
Connecting to TV and external
audio output
Connect Yellow(Video) end of the cable
to the TV video input.
Connect Red(right) end and White(left)
end of the cable to audio inputs on your
audio devices.
1
2
4
3
How to use digital wireless MIC 5
ET28KH QUICK GUIDE | 02
HOW TO INSTALL
How to power on/off 6
Connect the power adaptor as shown in the picture.
Turn on the power switch on the right side of the
main device.To turn it off, press button on the remote controller and turn off the power switch on the
right side of the main device.
Connecting to HDTV with multimedia
high definition input
HD-TV cable : Connect one end of the cable
to the HD output on the back part
of the main device and the other end of the
cable to the HD socket on your HDTV.
Buttons on the MIC will function similarly with the remote controller that is included in the package.
Press and hold for 2 seconds to turn ON or OFF the MIC.
※ If the MIC does not work, please follow below steps.
1. Turn off the MIC.
2. Press "0" button on the wireless MIC, and then press " " button using another finger.
(Do not release button "0" and " " until the word "SEL" appears on the LCD of MIC.)
※ MIC turns off automatically, if there is no voice input or other button inputs for 10 minutes.