Marantz SR6005 - Manual (Page 41)

37
Basic version
Simple version
Information
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Advanced version
For speaker impedance and speaker cable connections, see page 5.
Connect
5.1-channel connection
For 5.1-channel playback, set “Set up “Amp Assign”” (vpage 39) to “Normal”.
FL FR
C
SL SR
SW
Front A/B connection
The second set of front speakers can be connected to the FRONT B/HEIGHT terminals.
In this case, perform the settings using the SPKR A/B button on the remote control (vpage 23 “Set the
front speakers to be used”).
FL(A) FL(B) FR(B) FR(A)
SW
For surround playback of a multichannel source, if you connect the center speaker, surround speakers,
surround back speakers and subwoofers, 7.1-channel playback is available.
Front speakers can be used separately, depending on the speaker’s specifications or playback source such
as front speakers (A) for multichannel playback and front speakers (B) for 2-channel playback.
NOTE
When using the A front speakers and B front speakers simultaneously, make sure you check the impedance
of the connected speakers (vpage 5).