Connecting devices with remote control connectors, Connecting the power cord, Remotely connecting marantz devices – Marantz PM-14S1 User Manual
Page 23
15
Preparation
Playback
Settings
Tips
Appendix
ENGLISH
Connections
Connecting devices with remote control connectors
Performing operations by RC on this unit without visual contact
You can connect an external IR receiver to the REMOTE CONTROL connectors to perform
operations on this unit with the supplied remote control unit without visual contact. This might
be necessary if the unit is hidden in a cupboard or corner, so you can’t directly point with the
remote control unit to the device.
RC OUT
IR receiver
Remotely connecting Marantz devices
You can transmit remote control signals simply by connecting a Marantz audio device to the
REMOTE CONTROL IN/OUT connectors using the remote connection cable provided with the
device.
Set the remote control switch located on the rear panel of the connected audio component to
“EXTERNAL” to use this feature.
Connecting the power cord
Wait until all connections have been completed before connecting the power cord.
To household power
outlet
(AC 230 V, 50/60 Hz)
Power cord
(supplied)
1.PM14S1N_ENG_Final_0708.indd 15
2013/07/11 19:14:16