Digital Networks North America PCXBV-Ux - Manual (Page 6)

2
DDC (Display Data Channel)
DDC is a communication channel over which the monitor automatically
informs the host system about its capabilities. DDC uses a formerly
unconnected signal pin in the 15-pin VGA connector. The system will perform
the “Plug ‘n Play” feature if both the monitor and the host implement DDC
protocol.
Installation
Installation/Operating Guidelines
Observe the following basic rules for installation and use.
Do . . .
•
Use the power cord supplied with the monitor, which is UL-, CSA-,
and VDE-approved.
•
Turn the monitor off when not being used for an extended period of
time, or use Power Management if applicable.
Do Not . . .
•
Overload the ac outlet.
•
Move the monitor on a stand over carpet or thresholds.
•
Push objects into the monitor’s openings.
•
Add accessories that are not designed for this monitor.
•
Operate the monitor near water or in a damp environment, which
could cause and electrical hazard.
•
Operate the monitor near magnets, motor devices, transformers,
high power lines, or large steel pillars, which can cause distortion in
the picture.
•
Obstruct the ventilation openings in the monitor’s cabinet, such as
placing the monitor on a rug or within an enclosure.
•
Place the monitor near a radiator or heat source.