Maytag MGDB880BW Dimension Guide - Manual

Gas Dryer
PRODUCT MODEL NUMBERS
W10562336B
08/2013
NOTE: Most installations require a minimum 5" (102 mm)
clearance behind the dryer for the exhaust vent with elbow.
See “Venting Requirements”.
MGDB700B, MGDB725B, MGDB880B, MGDB980B
DRYER DIMENSIONS
Back view Side view
Models with riser
Models without riser
Back view Side view
Bottom view:
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with
tested spacing of 0" (0 mm) clearance on sides and rear.
■
Additional spacing should be considered for ease of
installation and servicing.
■ Additional clearances might be required for wall, door, and
floor moldings.
■ Additional spacing should be considered on all sides of
the dryer to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilitation openings are
acceptable.
■ Companion appliance spacing should also be considered.