Maytag MFF2055DRM User Manual

Page 14

Advertising
background image

14

External Control Panel

IMPORTANT (External Control only): The display screen on the
dispenser control panel will turn off automatically and enter
“sleep” mode when the control buttons and dispenser levers
have not been used for 2 minutes or more. While in “sleep”
mode, the first press of a control button will only reactivate the
display screen, without changing any settings. After reactivation,
changes to any settings can then be made. If no changes are
made within 2 minutes, the display will re-enter “sleep” mode.

Touch any control button on the dispenser panel to activate
the display screen.

Temperature Control

For your convenience, the temperature control is preset at the
factory. When you first install your refrigerator, make sure the
control is still set to the recommended setting as shown.

Internal Control - Recommended Setting “3 Boxes”

External Control - Recommended Setting “3 Snowflakes”

Adjusting the Controls

If you need to adjust the temperature in either the refrigerator or
freezer compartment, use the settings listed in the following chart
as a guide.

Press the TEMP button to display the desired number of
snowflakes or boxes from (1 snowflake/box [least cold] to all
5 snowflakes/boxes [coldest]).

NOTE: Except when starting the refrigerator, do not adjust the
control more than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.

Cooling On/Off

Your refrigerator and freezer will not cool when cooling is
turned off. Follow the directions specific to your model.

Internal Control Panel

To turn cooling off, press and hold both the SPEEDCOOL and
MOISTURE CONTROL buttons at the same time for
3 seconds. When cooling is off, “Cooling Off” will appear on
the display screen.

To turn cooling back on. Press and hold both the
SPEEDCOOL and MOISTURE CONTROL buttons at the same
time for 3 seconds. When cooling is on, “Cooling Off” will
disappear and the previously selected settings will appear on
the display screen.

CONDITION/REASON:

ADJUSTMENT:

REFRIGERATOR too warm

FRIDGE TEMP one
more snowflake/box

FREEZER too warm/too little ice

FREEZER TEMP one
more snowflake/box

REFRIGERATOR too cold

FRIDGE TEMP one less
snowflake/box

FREEZER too cold

FREEZER one less
snowflake/box

Advertising
This manual is related to the following products: