Once connections are completed – Denon AVR-2310CI User Manual
Page 23
20
ENGLISH
Get
ting Star
ted
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifi
cations
Multi-Zone
Set
tings
Once Connections are
Completed
Turning the Power On
1
Press
.
The power indicator lights red and the
power is set to the standby mode.
2
Press
.
The power indicator fl ashes green and the
power turns on.
b
Also press
when in standby
mode, the power turns on.
When
has been pressed, the input source set with the
is set. If a
has been pressed, the input source
stored in the memory for the quick select function is set (vpage
55 “Saving frequently used settings (Quick Select Function)”).
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, either press
to turn off the
power, or unplug the power cord from the power outlet.
• When the ZONE2 power is switched on, and you want to switch off
the MAIN ZONE power, press
.
Turning the Power Off
1
Press .
The power is set to the standby mode.
2
Press
.
The power indicator turns off, and so does
the power.
This operation can also be performed by pressing a
on
the main unit.
Front
Front
Selecting the Input Source
There are three ways to select the input source, as described below.
q
Selecting the input source using the Source Select menu (GUI
menu)
w
Selecting the input source using the SOURCE SELECT button
(Main remote control unit)
e
Selecting the input source using the
(Main unit)
q
Using the Source Select Menu
The input source can also be selected using the source selection
menu.
1
Set
to
“MAIN/TV”
to “MAIN”.
2
Press
.
Display the “Source Select” menu.
q
Input Source : The name of the highlighted input source is
displayed.
w
Recently used sources : The currently selected input source is
highlighted.
e
Icons for the input sources in the different categories are
displayed.
Video :
(SAT/CBL),
(TV),
(VCR),
(DVR),
(V.AUX)
Player :
(HDP),
(DVD),
(CD),
(PHONO)
Tuner :
(TUNER),
(SIRIUS)
iPod
:
b
“
” is displayed when using a Control Dock for
iPod.
3
Use
uio
p
to select the input source icon, then
press
.
The input source is set and the source selection menu is turned
off.
SOURCE SELECT
:SAT/CBL
Recent Source
Enter
Select
E N T E R
SOURCE SELECT
:SAT/CBL
Recent Source
Enter
Select
E N T E R
q
w
e
Use the device selection buttons on the main remote control unit to
set the device to be operated beforehand.
Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vpage 33).
To turn off the source selection menu without selecting an input
source, press
again.
•
•
•
1
Set
to
“MAIN/TV”
to “MAIN”.
2
Press the SOURCE SELECT button (vpage 7).
The desired input source can be selected directly.
e
Operating on the Main Unit
w
Operating on the Main Remote Control Unit
Rear
Front
Connections
Turn
.
b
If “Tuning Preset” mode is selected for
the input source, press
before turning
.