Maytag MMC5086AAQ - Manual (Page 10)

10
Operating Instructions
SETTING CLOCK
When your oven is plugged in for the
first time or when power resumes
after a power interruption, the num-
bers in the display reset to “:”.
NOTE: You can select AM or PM by
touching CLOCK pad alternately.
EASY COOK
A time-saving pad, this simplified
control lets you quickly set and start
microwave cooking without the need
to touch START.
NOTE: If you touch EASY COOK, it
will add 30 seconds up to 3 minutes
30 seconds; after 3 minutes will add
1 minute up to 99 minutes 59 sec-
onds.
TIME COOK
This function allows you to cook food
for a desired amount of time.
Because many foods need slower
cooking (at less than HI-POWER),
there are 10 power level settings in
addition to HI-POWER.
When cooking is complete, beeps
will sound. The word END shows in
the display window. Then the oven
shuts itself off.
NOTE: If you do not select the power
level, the oven will operate at power
HIGH. To set HI-POWER cooking,
skip steps 2 and 3 below.
Example: To cook food on 80%
Power (power 8) for 5 minutes 30
seconds
Example: To set 11:11 (PM)
1. Touch CLOCK
pad twice. Display
scrolls the words
PM ENTER TIME
OF DAY shows in
the display.
2. Enter the time by
using the number
key pads. [1], [1],
[1], and [1].
Display scrolls the
words 11:11P
TOUCH START.
3. Touch START.
The clock starts
counting and
11:11P shows in
the display.
Example: To set for 2 minutes
Touch EASY COOK
4 times. The oven
begins cooking and
display shows time
counting down.
1. Enter 5 minutes 30
seconds by touching
[5], [3], and [0].
Display scrolls the
words 5:30 TOUCH
START OR POWER.
2. Touch POWER
LEVEL. Display
scrolls the words
ENTER POWER
LEVEL 1 TO 10.
3. Touch 8.
To select power level
80%. Display scrolls
the words P-80
TOUCH START.
4. Touch START.