MBM Corporation ES 3000 - Manual (Page 12)

- 12 -
OP Panel Guide-3
INFORMATION Menu
The information menu is appeared when the [INFO] button is pressed on the ready state.
1) What is the “Information‟ menu?
In this menu, a couple of information about the machine is showed.
And user can check for several settings and information a b o u t the setup.
2) Menu
a) Total Count : The total count of the machine
b) Paper Thickness: The sensitivity of the DFD
c) Firmware Version
d) Installation Date: The date when the machine was installed.
e) Total Usage Time: Measure the using time.
f) Batch Count: The number of the batch mode.
For moving back to the ready state, press the [INFO] button again.