Mega Catch MCA-600 Alpha - Manual (Page 4)

Before attempting operation of your ALPHA Trap, follow these instructions:
1. Remove the Trap from the carton.
2. Remove the box containing the transformer.
3. Remove base of Trap - turn counter-clockwise.
4. Attach the Catch Bag to the plastic Catch Bag holder by stretching elastic neck of Catch Bag over
ribs of Catch Bag holder. (see diagram below)
5. Attach the Catch Bag to the Fan Base inside the Trap. (see diagram below)
6. Replace base of Trap - turn clockwise.
7. Your ALPHA Trap comes with a low-voltage transformer with weatherproof connectors. Plug the
transformer cable into the connection point at the base of the Trap.
8. Plug transformer into mains power. Turn power on.
9. When the Trap is operating, the Fan should be running, and the LED lights should be flashing
intermittently. If the Trap is not operating correctly then re-read these instructions or refer to the
Problem Solving section or email us at [email protected].
Initial Set Up Instructions
Removing the Catch Bag
To remove the Catch Bag from the Trap, follow these steps:
Before removing the Catch Bag, disconnect the power to
your Mega-Catch™ Mosquito Trap so that the Fan is not
operational. Then crush the base of the Catch Bag in your
hand to kill any mosquitoes that do remain alive. Remove
Catch Bag by twisting Catch Bag holder anti-clockwise.
Dispose of Catch Bag contents well away from your dwelling
so as not to attract ants.
Mosquitoes collected in the Catch Bag will usually die very
quickly without access to moisture. In cooler climates they
may live for a longer period. In times of heavy infestations
of mosquitoes, it may be necessary
to empty the Catch Bag on a regular basis in order to
ensure optimum operation of the Trap.
Catch Bags should be hand washed in warm soapy water from time to time. Replacement Catch Bags
are a consumable item and are available from your Authorized Distributor.
Fan Base
Catch Bag
holder
Ribs