Measurement Computing DBK205 - Manual

DBK205
P4 to 12-Slot Screw Terminal Adapter
For DaqBoard/2003 and cPCI DaqBoard/2003c
Not Applicable to DaqBook/2000 Series Devices
Overview ….. 1
Connections …… 2
Note: DBK205 provides a 12-slot screw terminal for DaqBoard/2003 and cPCI DaqBoard/2003c.
This product is not used for LogBook applications.
Reference Notes:
In regard to calculating system power requirements refer to the DBK Basics section.
Chapter 2 includes pinouts for P1, P2, P3, and P4. Refer to pinouts applicable to your
system, as needed.
For a quick comparison of all DBK200 Series boards, refer to the DBK200 Series Matrix. The
matrix is located just before the DBK200 section.
Refer to the DaqBoard/2000 Series and cPCI DaqBoard/2000c Series User’s Manual
(p/n 1033-0901) for information pertaining to those products, as needed.
Overview
DaqBoard/2003 and cPCI DaqBoard/2003c boards communicate [external from the host PC] through a
100-pin P4 connector. The DBK205 provides 12 screw-terminal connections on one terminal block (TB1),
as follows:
• four analog outputs (DAC0, DAC1, DAC2, and DAC3)
•
one digital ground (DGND)
• five analog grounds (AGND)
•
one external clock (CLK)
•
one external trigger (XTTL)
DBK205
P4 to 12-Slot Screw Terminal Adapter Board
Note: The signal lines on DBK205’s P4 connector correspond with P3-associated pins on the P4
connector of DaqBoard/2003 and cPCI DaqBoard/2003c.
Note: The P1, P2, and P3 connectors discussed in association with DaqBoard/2000 Series and /2000c
Series boards are subset connectors of the 100-pin P4 connector that is located on those boards.
Chapter 3, System Connections and Pinouts, includes pinouts for P1, P2, P3, and P4.
DBK Option Cards and Modules 987594 DBK205, pg. 1