Measurement Computing DBK209 - Manual

DBK209
P4-to-P1/P2/P3 Mini-Adapter Board
For Analog I/O, Digital I/O, & Pulse/Frequency
Overview …… 1
Connections …… 2
DBK209 Dimensional Drawing …… 3
Note: DBK209 connects to a P4 connector via cable and provides P1, P2, and P3 connectors.
This product is not used for LogBook applications.
Reference Notes:
In regard to calculating system power requirements
refer to the DBK Basics section.
Chapter 2 includes pinouts for P1, P2, P3, and P4.
Refer to pinouts applicable to your system, as needed.
For a quick comparison of all DBK200 Series boards,
refer to the DBK200 Series Matrix. The matrix is
located just before the DBK200 section.
Refer to the DaqBoard/2000 Series and cPCI
DaqBoard/2000c Series User’s Manual
(p/n 1033-0901) or the DaqBook/2000 Series User’s
Manual (p/n 1103-0901) for information pertaining to
those products, as needed. DBK209
P4-to-P1/P2/P3 Mini-adapter Board
Overview
DaqBoard/2000 Series and /2000c Series Boards communicate [external from the host PC] through a
100-pin P4 connector. Typically a DBK200 Series P4-adapter is used to provide one or more DB37
connectors (P1, P2, P3). The DBK200 Series also includes a few panel-mount card options that connect
directly to the P4 connector via a cable.
The DBK209 is a mini-adapter board suitable for both analog and digital expansion. The board provides
three DB37 connectors (P1, P2, and P3). DBK209 connects to DaqBook/2000 Series Device,
DaqBoard/2000 Series Board or /2000c Series Board P4 connector via a CA-195 cable.
Other than the form factor, DBK209 is identical to DBK201.
Note: The P1, P2, and P3 connectors discussed in association with DaqBook/2000 Series devices,
DaqBoard/2000 Series boards and cPCI DaqBoard/2000c Series boards are subset connectors of the
100-pin P4 connector that is located on those boards. Chapter 2, System Connections and Pinouts,
includes pinouts for P1, P2, P3, and P4.
DBK Option Cards and Modules 909094 DBK209, pg. 1