Measurement Computing DBK213 User Manual

Dbk213, Screw-terminal & expansion card module, Overview

Advertising
background image

DBK213

Screw-Terminal & Expansion Card Module

3-Card Slot, Includes P1/P2/P3/P4 compatibility for Analog I/O, Digital I/O, & Pulse/Frequency

Overview …… 1
Connection Tips…… 2
Installing DBK Cards …… 3
System Examples …… 4
Using the Screw-Terminal Blocks …… 6
Adding RC Filter Networks …… 10
Specifications …… 12
Reference Notes …… 13

DBK213 Front Panel

Upper Slots for Terminal Board Wiring Pass-Through
Lower Slots for Housing up to 3 DBK options, 1 per slot

The DBK213 module is compatible with the following products:

DaqBook/2000 Series

• DaqBoard/2000 Series • DaqLab • DaqScan

Overview

The DBK213 module includes:

o

P1, male DB37 connector for Analog I/O.

o

P2, male DB37 connector for Digital I/O.

o

P3, male DB37 connector for Pulse/Frequency (Digital and Counter/Timer) I/O.

o

P4, 100-pin connector. Provides same signal connection as P1, P2, and P3 combined.

o

Three slots for housing optional DBK cards. The DB37 connector of each card will extend out

through the rear panel where it can be secured with hex nuts.

o

12 on-board screw-terminal blocks (accessible after removal of cover)

o

The terminal blocks [TB1 through TB12] tie in to P1, P2, P3, and P4 and provide for easy signal

connection.

o

Three front panel slots for wiring pass-through.

o

On-board socket locations for custom RC Filter networks (accessible after removal of cover).

DBK213 Rear Panel

The upper section includes P1, P2, P3 and P4 connectors. The lower section
has 3 openings for pass-through of DB37 connectors from optional DBK cards.

The three DB37 connectors can be used as direct connections points for I/O signals, or signals can be
connected to each 37-pin connector via a DBK card or module. The lower section of the DBK213 includes
three built-in expansion slots for housing card options.

The unit includes screw-terminal access to all analog and digital I/O from the host data acquisition device.
Related to the screw-terminals are 3 front panel upper slots for routing all I/O wiring.

DBK Option Cards and Modules

969294

DBK213, pg. 1

Advertising
Table of contents