Measurement Computing DBK215 - Manual

DBK215
16-Connector BNC Connection Module
With 68-Pin SCSI Adaptability for Analog I/O, Digital I/O, & Pulse/Frequency
Overview …… 1
Block Diagram …… 2
Connection Tips…… 3
System Examples …… 4
Using the Screw-Terminal Blocks …… 5
Adding RC Filter Networks …… 11
Specifications …… 13
DBK215 Front Panel
Upper Slot for Terminal Board Wiring Pass-Through
Lower section of 16 BNC Connectors
The DBK215 module is compatible with the following products:
•
DaqBoard/500 Series
• DaqBoard/1000 Series
Overview
DBK215 Rear Panel
Includes a 68-pin SCSI connector designated as P5.
The DBK215 module includes:
o BNC Access to 16 inputs or outputs (on front panel)
o on-board screw-terminal blocks*
o on-board socket locations for custom RC Filter networks*
o 68-pin SCSI connector (on rear panel)
* The top cover plate must be removed to access the terminal blocks and
the RC filter network section of the board.
The 68-pin SCSI connector (P5) connects to a DaqBoard/500 Series or a DaqBoard/1000 Series 68-pin
SCSI connector via a CA-G55, CA-G56, or CA-G56-6 cable. Cable descriptions are provided on page 2.
The DBK215 provides BNC and screw-terminal access to all analog and digital I/O from the host data
acquisition device. Related to the screw-terminals is a front panel slot for routing all I/O wiring.
Reference Note:
DBK215 is intended for DaqBoard/500 Series and DaqBoard/1000 Series applications. Refer
to the DaqBoard/500 Series and DaqBoard/1000 Series documentation for detailed
information on those devices. For information concerning similar16 channel BNC
connectivity/interface boards, designed for use with other products, refer to the DBK213 and
DBK214 sections of the DBK Options manual (p/n 457-0905).
DBK Option Cards and Modules 967894 DBK215 pg. 1