Measurement Computing DBK32A - Manual

DBK32A
Auxiliary Power Supply Card
Overview …… 1
Configuring the Primary Device for use with a DBK32A …… 2
Connecting the DBK32A …… 3
Specifications …… 4
Reference Notes:
o Chapter 2 includes pinouts for P1, P2, P3, and P4. Refer to pinouts applicable to
your
system, as needed.
o In regard to calculating system power requirements, refer to DBK Basics located near
the front of this manual.
Overview
DBK32A Power Supply Card
The DBK32A provides added power in configurations where the number of expansion cards exceeds the
power available from a LogBook, DaqBook, or DaqBoard. For power, the DBK cards rely on voltages
supplied via the P1 connection. The DBK32A supplies ±15 V @ 500 mA via the P1 bus and is compatible
with all analog DBK cards.
The DBK32A does not provide +5 V. If +5 V is required by the DBKs in use, you should use the
DBK33 Triple-Output Power Supply. Refer to the DBK33 Document Module for additional
information.
DBK Option Cards and Modules 879795 DBK32A, pg. 1