Measurement Computing ADAC/5500 Series - Manual (Page 57)

6.4 TERMINATION BOARDS
6.4.1 ADAC-TB-8
The ADAC-TB-8 terminal board provides a means of bringing the ADAC/5500MF signals out from its
68-pin connector and onto screw terminals. There is no active circuitry on the terminal board, thus the
ADAC/5500MF board’s specifications are not affected by its use.
Size: 3.30” L x 5.28” H
Connector: 68 pin standard "SCSI Type III" female connector
Temp. Range of Operation: 0 °C – 55 °C
Power Requirements: none
Used with: ADAC/5500MF
Connects to Board via: CA-G55-ADAC, 68-conductor, 3 foot expansion cable
ADAC Series 908196
-52- ADAC/5500 Series User’s Manual