Measurement Computing Digital232 - Manual (Page 47)

Section 3 Command Descriptions
3.25
Terminator Yn
The serial terminator(s) defaults at power-on to the settings on Switch S1. It also
may be programmed for any combination of Carriage Return (CR) and Line Feed
(LF). The Y0 mode is the most commonly accepted terminator, CR.
Y0 CR Only
Y1 LF Only
Y2 LF-CR
Y3 CR-LF
Example:
@ reset the Digital232
Y3 select line feed terminator
U0 send status to the host
status byte indicates Y3 selected