Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 138)

Section 5 Command Descriptions
5.68
RESUME
The RESUME command un-asserts the Attention (ATN) bus signal. As the Active
Controller, Attention is normally kept asserted by the Micro488/EX but it must be un-
asserted to allow transfers to take place between two Peripheral devices. In this case,
the Micro488/EX SENDs the appropriate talk and listen addresses, and the must un-
assert Attention with the RESUME command.
SYNTAX RESUME
or
RESU
RESPONSE None
MODE CA
BUS STATES *ATN
EXAMPLE PRINT#1,"RESUME" Un-assert ATTENTION line.