Datavideo MP-6000 Mk2 - Manual (Page 47)

46
Use the Up, Down Left and Right Arrow
buttons to navigate and set the date and time
Then use the Right Arrow button to highlight
save, and press the Enter button to confirm.
The screen will go black for a few seconds
and then the MP 6000 is ready to go.
RS 232 Information
The MP 6000 can be fully controlled via RS 232. The RS 232 port situated on the rear of the MP 6000 uses
standard RS 232 wiring. Full information on the control protocol is available from your local Datavideo
office. Please read the chapter on GPI functions, as this will guide you regarding which Dip switch settings
to use.