Dynabrade PD0502 - Manual (Page 8)

Dynabrade Air Lube
• Formulated for pneumatic equipment.
• Absorbs up to 10% of its weight in water.
• Prevents rust and formation of sludge.
• Keeps pneumatic tools operating longer
with greater power and less down time.
95842: 1pt. (473 ml)
95843: 1gal. (3.8L)
96179 Motor Tune-Up Kit
• Includes assorted parts to help
maintain and repair motor.
Dynabrade Angle Gear Oil
• Specifically formulated to saturate wick system in right
angle gear head.
• Easy to apply using Dynabrade P/N 95541 Oil Gun.
Apply 3 plunges every 8 hours of operation into tools
lubrication fitting.
95848: 2 oz. tube
95849: 10 oz. tube
52296 Repair Collar
• Specially designed collar for use in vise to prevent
damage to valve body of tool during disassembly/assembly.
Dynaswivel ®
• Swivels 360° at two locations which allows an
air hose to drop straight to the floor, no matter
how the tool is held.
94300 1/4" NPT.
DYNABRADE
®
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
© DYNABRADE, INC., 2005 PRINTED IN USA PD05.02_01/05
Visit Our Web Site: www.dynabrade.com Email: [email protected]
Reference Contact Information
1. American National Safety Institute – ANSI 3. European Committee for Standardization
25 West 43 rd Street Rue de Stassart 36
Forth Floor B - 1050 Brussels, Belgium
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Optional Accessories
Special Greasing Instructions
Apply 3 plunges
into lubrication
fitting every
24 hours of
operation.
Expect a
gear life of
500 hours
minimum,
with proper
lubrication.
Lubricate wick system through the angle gear oil fitting with 2-3 plunges for every 24
hours of use, to achieve maximum gear life.
Important: Use only the recommended angle gear oil for the wick system.
Do not contaminate the wick with any other oil or grease product.
(Order 95848 Gear Oil and 95541 Gun)
02052 Housing
01040 Gear Oil Fitting
Special Repair Tools
Note: Mentioned In Assembly/Disassembly
96216 Bearing Press Tool
96232 (#2) Arbor Press
96346 (2") Bearing Separator
96210 Bearing Removal Tool
96239 Bearing Press Tool
52296 Repair Collar
50971 Lock Ring Tool