MEGAPOWER ML51 - Manual (Page 6)

6
Setting Up the PICO Projector
1. Plug the Power Adaptor to the DC in connector at the rear of the DLP Pico
Projector.
Note : For first time use with internal battery, charge unit for about 4~5hours
2. Slide the ON/OFF power switch towards the rear of the unitto turn on Projector
and will take a short while to initialize. After booting up, the projector will display
the Home Screen
3. Place the Projector at a suitable distance so the image size is around 30” to 40”
diagonal
4. Turn the Focus Knob to bring the image into focus.
5. External signal source can also be played through the projector via the AV input
connectors.
DC Input
Audio Out
USB Port
AV Input
SDcard Slot ON/OFF Slide Switch
Focusing Ring