Meinberg DU35S - Manual (Page 15)

15
Technical Specifications:
OPERATION
MODE:
- as free running quartz clock with internal RTC
- as slave clock synchronized by radio clock or master clock
with serial time strings
DISPLAY: LED dot matrix display 5x7 dots, 2 lines (50mm character
height), LED circle for indication of seconds
INPUTS: serial interface, RS232 or 20mA current loop (passive/active)
DSUB25 connector
OUTPUTS: serial interface, RS232 or 20mA current loop (passive/active)
DSUB9 connector
BAUDRATE: 2400, 4800, 9600 or 19200 baud
FRAMING: 7E2 or 8N1
TIME STRING: see "Format of the Meinberg Standard Time String"
BUFFERING: In case of supply voltage failure the on-board RTC keeps the
time based on XTAL for more than 10 years.
POWER
REQUIREMENTS: 85-264VAC, 50/60Hz / 120-375VDC, approx. 22VA
FUSE: 250mA T (slow blowing)
PHYSICAL
DIMENSION:
323mm x 323mm x 57mm
WEIGHT: 4,7kg