Care and cleaning – Methven Aio Aurajet Shower Handset User Manual

Page 2

Advertising
background image

Methven warrants this product against manufacturing defects and that it is suitable for use

under the general operating conditions specified in this instruction sheet. However, regional

regulations apply and may affect your warranty. Please refer to www.methven.com or call

customer service for full details.

New Zealand

0800 804 222

Australia

1300 638 483

UK

0800 195 1602

Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with

contamination free warm soapy water and a damp soft cloth.
A filter washer should be installed in the hose cone on the water outlet and it should be

cleaned periodically.
If shower performance is compromised by the build-up of lime-scale, clean by using a soft

toothbrush and gently scrubbing along the spray slot under running water.


IMPORTANT: Please read all of the instructions before installation.
General:

Methven recommends this product is installed by a licensed plumber in compliance with all

relevant regional regulations.

After installation all connections must be checked for leaks.

All outlets used primarily for personal hygiene shall deliver water at a safe temperature as per

regional regulations.

It is the responsibility of the installer to ensure a waterproof seal is achieved.

NOTE: Some showers may not provide an effective shower when used with gravity fed heated

water systems or where pressures are less than 150kPa/1.5bar at the outlet. Additionally showers

with flow rates of less than 9L/min may not allow the following to function correctly:

- some instantaneous water heaters

- some tempering valves

- some thermostatic mixing valves

Care and Cleaning:

439910

ISSUE A

Advertising