Metro MetroMax i Intermediate S-Hook Kit - Manual

INST-9996X
11/04
1. Remove the shelf mats from the shelf frame.
2. Position the plastic and metal clips onto the shelf frame and lock into place as shown
in Figs. 1 & 2. The tab on the outside back of the metal clip should lock into the horizontal
flange of the plastic clip as shown on the inside view in Fig. 2. Note – the S-Hook clips should
be spaced as far apart on the shelf frame as possible.
3. Insert the S-Hooks as shown in Fig’s. 1 & 2.
4. Insert the plastic hole plugs into the shelf collars as shown on pg. 4 of the MetroMax assembly
instruction.
5. Re-install the shelf mats onto the shelf frame.
9996X MetroMax Intermediate S-Hook Kit
INSTALLATION
INSTRUCTIONS