Metro Mounting Post to Dolly - “B” PLATE CASTER - Manual

L01-236
REV. A 6/06
Information and specifications are subject to change
without notice. Please confirm at time of order.
NOTE:
This assembly instruction
applies to “B” plate casters only —
please see reverse side for “C”
plate applications.
POST – SuPEr ErEcTa,
METrOMax Or METrOMax Q
(SuPEr ErEcTa ShOwN)
caSTEr harDwarE
“Z” chaNNEL
ObrOuND hOLES TyP.
3 /
8
DIa. FLaT waShEr
3 /
8
DIa. LOcKwaShEr
3 /
8
-16 x 2 3 /
4
" LG. hEx hEaD bOLT
“u” chaNNEL
buMPEr
“b” PLaTE caSTEr
®
InterMetro Industries corporation
North Washington Street, Wilkes-Barre, PA 18705
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
aSSEMbLy INSTrucTION FOr
MOuNTING POST TO DOLLy -
“b” PLaTE caSTEr
1. Remove and discard the existing leveling bolt
that comes with the post (Super Erecta only).
2. Mount “B” plate casters as shown with the
caster hardware provided.
3. Align the bottom of the posts (threaded insert
(SES) or levelling foot (MetroMax & MetroMax
Q) over the large holes in “Z” channel frame.
(Make sure levelling feet for MetroMax &
MetroMax Q are screwed all the way in before
assembling).
4. Place a flat washer and lockwasher onto a
3 /
8
-16 x 2 3 /
4
" hex head bolt (all provided in
the dolly hardware bag) and insert thru the
underside of the dolly frame and into the post
as shown. Make sure that the washers are
positioned as shown.
5. Tighten all bolts securely as required.
ThrEaDED INSErT (SES)
Or ThrEaDED LEvELEr
(METrOMax & METrOMax Q)