Metro Worktable, HD, Stainless Steel - Manual

Attach four pairs of plasic split sleeves to the posts as shown. Note that the sleeves are thicker at the bottom.
Make sure that sleeves snap securely into the grooves on the post.
Mobile:
1st groove
Stationary:
1st groove
R
Lab Solutions
Weight Capacity: 50 lbs. / sq. ft. (45kg / m ) 2
Worktable is not intended for over-the-road use.
1. Assemble posts.
mobile
post
stationary
post
pair of
split sleeves
attach to lowest
possible location
Casters are not supplied with table.
Heavy Duty Stainless
Steel Worktable