Metro Replacement C5 9 Series Cabinet Bumper - Manual

INSTALLATION
INSTRUCTIONS
INSTR-C59-BMPR
07/13
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA USA 18705
For Product Information Call: 1-800-992-1776
Visit Our Web Site: www.metro.com
Information and specifications are subject to change
without notice. Please confirm at time of order.
*Save this document for future application, load rating and/or safety reference.
REPLACEMENT C5 9 SERIES CABINET BUMPER
TM
PART #RPC5-9-BMPR
Figure 1
(2) Polymer Drip Trough Bumpers, (2) Bumper Channels,
(4) Casters (16) Mounting Bolts, (16) Washers
1. Lay the cabinet on it’s side.
2. Remove the mounting bolts holding the casters in place and remove the casters and bumper channel.
3. Install the new bumpers by aligning the holes in the bumpers with the caster mounting holes (bumper
mounts between the cabinet body and bumper channel (As Shown in Figure 1).
4. Reinstall the casters and caster mounting bolts and tighten bolts securely.
5. Apply clear food grade silicone caulking to all joints where the bumpers meet the cabinet sides
(As Shown in Figure 2).
Figure 2
Bumper
Bumper
Channel
Caster
Washer
Mounting
Bolts
Bumper
Silicone Caulk
(Front and Back
Bumper)