Metro Starsys Workcenters Filler Kit - Manual

Part No. INST-BBFLR25
Date: 10/09/01
Filler Kit - 25” Deep Back-to-Back Countertops
1. Use the filler plate (Qty. 2) as a template to
position units back to back as shown.
2. Level each base unit, attach to floor as required,
and secure countertops following the steps
outlined in the Starsys WorkCenters Installation
Manual. (Shipped in each base unit)
3. Locate filler plate within the back extrusion of
each unit.
4. Align holes in the filler plate with extrusion groove
as shown, fasten in place with screws provided.
(Qty. 12)
Note: Filler plates can be trimmed, punched, or
drilled to accommodate utilities as needed.
WORKCENTERS
INSTALLATION
INSTRUCTIONS