Metro Starsys LA6 Full Feature Touchpad - Manual

Electronic Locking User Guide
Section 1: General Information
Section 4: Low Battery Indicator/Recharge Batteries
Section 2: Unlock & Lock Cart
Section 5: Set Up Code Functions
Section 3: Manually Lock & Unlock Cart
Carts always arrive with 4 pre-programmed codes. The following is
a review of each:
A "Low Battery-Recharge" message is displayed on the LCD screen
when it's time to recharge batteries. It is recommended that
batteries be routinely recharged for 6 to 8 hours.
- Plug the recharger into a standard 120VAC wall outlet
- Plug the recharger jack into the 12" long breakaway extender, and
the male angled end of the extender into the jack on the rear of
the cart
- The extender is important. It will help to prevent drive-away
damage if the cart is moved while connected to the recharger
- While the battery is charging, the light on the recharger will be
either red or yellow; when fully charged it will turn to green.
To Recharge Batteries:
Change Set Up Code:
Change Service Code:
Setting the Cart ID:
- Press any key to wake up touch pad
- Enter Set Up Code & Press OK
- Press FUNCTION key until "Set New Set Up ID" is displayed &
Press OK
- Enter New 3-digit Set Up Code & Press OK
- Enter PIN number to coincide with new Set Up Code or Press OK
to skip
- Press OK to verify new Set Up Code / PIN number
- Press SIGN OUT to exit Set Up Mode
- Press OK to wake up touch pad
- Enter Set Up Code & Press OK
- Press FUNCTION key until "Set New Service ID" is displayed &
Press OK
- Enter New 3-digit Service Code & Press OK
- Enter PIN number to coincide with new Service Code or Press OK
to skip
- Press OK to verify new Service Code / PIN number
- Press SIGN OUT to exit Set Up Mode
- Press OK to wake up touch pad
- Enter Set Up Code & Press OK
- Press FUNCTION key until "Set the Cart ID" is displayed &
Press OK
- Current ID will display on screen
- Press OK to change current ID or SELECT to skip
- Enter new Cart ID (must be 2 to 4 digits) & Press OK
- Press OK to verify new Cart ID
- Current Cart Name will display on screen
To Unlock the Cart:
To Lock the Cart:
- Press any key to wake up touch pad
- Enter 4-digit User Code and press "OK"
- The cart will now be unlocked.
- Press 'Sign Out' key
The cart can be unlocked and locked manually (without the
touchpad or electronics) by using the key lock.
To Unlock the Cart:
To Lock the Cart:
- Insert the key into the mechanical key lock and turn clockwise.
- Insert the key into the mechanical key lock and turn
counterclockwise.
The Set Up and Service ID numbers are limited to 3 digits each.
Management and Operator numbers have 4 digits with an optional
1 to 4 digit PIN.
A combined total of 2000 sign in ID numbers are available per cart.
These include 1 Set Up, 1 Service, and 1998 Supervisor and User
codes combined.
General Operating Instructions
Programming Instructions
Default
Unlock Cart
Change Set Up Code
Change Service Code
Add / Delete Supervisor Code
Edit Supervisor PIN / Name / Card
Add / Delete User Code
Edit User PIN / Name / Card
Set Auto Lock Timer - Cart
Set Cart Date & Time
Run Diagnostic Tests
311
X
X
X
X
911
X
1350
X
X
X
X
X
0531
X
X
Set Up
Code
Service
Code
Super-
visor
Code
User
Code
continued...
1
English 1-4 / Français 5-8 / Français Canadien 9-12 / Español 13-16 / Deutsch 17-20 / Italiano 21-24 / Português 25-28
Important:
- The angled connector must be plugged directly into the cart to
prevent breakage.
- Press OK to change Cart Name or SELECT to skip
- Enter new Cart Name & Press OK
- Press OK to verify new Cart Name
- Press SIGN OUT to exit Set Up Mode