Microcom 428T - Manual (Page 178)

Bar Codes Chapter 8
8-26 428T Operator’s Manual - 880037-0141
ROTATIONS<CR>
^D3<CR>
Figure 8-12 Bar Code Rotations
8.3 Bar Code Human Readable Text
Certain bar codes require human readable text and/or extended bars to conform to
specifications. This is accomplished by using specially created TCI’s, which add the human
readable text and extended bars. This section will provide the necessary information to
successfully add these items. This should not be confused with simply making all bar codes
human readable. For bar codes that do not require extended bars, simply access the data
that the bar code is using with a second field that generates a text representation of the data
and insert in the desired position.
TCI VALUE TCI DESCRIPTION
3 Text with UPC-A/UPC-E Checksum Digit added.
17 Text with UPC-E Checksum and Extended Bars added
22 Text with EAN-13 Checksum and Extended Bars added
23 Text with EAN-8 Checksum and Extended Bars added
28 Text with MSI 1 Checksum added
29 Text with MSI 2 Checksum added
32 Text with UPC-A Checksum and Extended Bars added
33 Text with UPC-A with Extended Bars added
51 EAN128
Table 8-10 Human Readable/Extended Bars TCI’s
ROTATIONS
270
Degrees
180
Degrees
90
Degrees
0
Degrees