MicroLinks UM06 - install manual - Manual (Page 3)

Microscope Installation Manual http://www.ViTiny.com
3
Copyright © 2008-2011 MicroLinks Technology Corp.
1. Introduction
This guide outlines how to install and uninstall the microscope application program step-by-step. In
the package, a setup CD should be provided. If the CD is missing or damaged, the setup files are
available through download at http://www.vitiny.com.
2. Microscope Application Program Installation and Uninstallation
2.1 Application Program Installation
2.1.1
Start the Setup Program
To begin, click “Install Microscope Application Program”, and then select a language from
the drop-down menu as seen in Fig. 2-1. If you wish to cancel the setup please click
“Cancel” and then click “OK”
Fig 2-1 setup language window
2.1.2
Welcome to the Microscope Setup Wizard
After selecting the language, the Microscope setup wizard will appear (see Fig.2-2). Click
“Next” to continue or “Cancel” to exit. In the following figures, “name” represents the
application program name and “X.XXX.XXXx” represents the application program version.