MicroLinks UM03 - install manual - Manual (Page 10)

Microscope Installation Instruction
10
Copyright © 2008-2011 MicroLinks Technology Corp.
3. Uninstall MICROSCOPE Driver
The driver is optional one, if you install it, you can have more additional functions added to the
MICROSCOPE AP.
Attention: Before install diver, please connect MICROSCOPE to the computer. If not, you can’t
install the program.
3.1 Install driver
3.1.1 Start setup driver
Please select Fig.1-1 to start Installing MICROSCOPE drive. Firstly please make sure to
connect MICROSCOPE to a pc. Otherwise, it will pop up Fig.3-1. Note: Please use the USB
cable from the gift box, do not use extension USB cable while connect microscope with a PC.
Fig.3-1 Not found MICROSCOPE step up
After click setup MICROSCOPE driver button, it will pop up Fig.3-2, now be ready to install the
window. If cancel installation, please click “cancel” button.
Fig.3-2 Getting ready to install