MicroLinks UM12 - install manual - Manual (Page 4)

Microscope Installation Manual http://www.ViTiny.com
4
Copyright © 2008-2014 MicroLinks Technology Corp.
2.1 Install software
2.1.1 Setup software
First, click “Install Microscope software”, next, please select a language, see Fig. 2-1,
the initial language will follow up the pc OS system. If you want to cancel setup please
click “Cancel” then click “OK”
Fig 2-1seup language window
2.1.2 Software Setup Wizard
After choosing the language, go to welcome to the Microscope setup wizard window
see Fig.2-2, then please click “Next” then continue. If want to cancel please click “Cancel”
button. In the following figs, “name” represents Microscope’s software name,
“X.XXX.XXXx” represents the software version.
Fig 2-2 welcome to the Microscope setup wizard