Microsens MS400230 - Manual (Page 9)

8
Technical Specification
Gigabit Fiber to Gigabit Fiber (100/1000) Media Converter technical
specification is shown as below.
Standard
IEEE802.3u
IEEE 802.3z 1000Base-SX/LX standards
IEEE802.3x Flow Control
Connector Fiber: 1000 SFP & 100/1000 SFP
Fiber parameters
Fiber Core: Multi-Mode (62.5/125
μm,
50/125
μm), Single-Mode (9/125μm)
Wavelength: 850nm (Multi-mode),
1310nm (Single-mode)
Fiber Distance: Depends on the transceiver
type
Link Loss
Forward
If 100/1000 SFP port link down, then converter
will force 1000 SFP port to link down
If 1000 SFP port link down, the media converter
will force SFP 100/1000 SFP port to link down.
DIP Switch
DIP Switch 1: Auto-Nego/Force mode for
100/1000 SFP port
DIP Switch 2: LLF (Link Loss Forwarding) or LFP
(Link Fault Pass-Through) Disable/Enable
DIP Switch 3: Auto-Nego/Force mode for 1000
SFP port