Microsens MS40020x - Manual (Page 4)

2
Features
Fast Fiber Converter Module
„ Comply with IEEE 802.3, 802.3u, and 802.3x standards.
„ Convert between UTP cabling and Fiber-optic cabling.
„ One RJ-45 connector, Auto-MDI/MDIX for UTP port.
„ Support 10/100 Mbps Auto-negotiation for UTP port.
„ Fiber cabling connectivity up to 30Km.
„ Store-and-forward switching architecture.
„ One fiber connector (SC) for 100Base-FX.
„ 4DIP-switches to set the operation mode and Link- Lost-Forwarding
function.
„ 6 LEDs for per port: 100, Link, Activity, Full, Collision, and per unit
Power.
„ External DC power adapter 12V/1A.
„ Two types of module: Stand-alone and mounted in converter chassis.
„ FCC Class A, CE, UL, and CUL Mark certification
WDM Converter Module
„ Comply with IEEE 802.3, 802.3u, and 802.3x standards.
„ Convert between UTP cabling and Fiber-optic cabling.
„ WDM (Wavelength Division Multiplexing) supports single fiber
converter, transporting Bi-direction full-duplex signal over a single
fiber simultaneously.
„ One RJ-45 connector, Auto-MDI/MDIX for UTP port.
„ Support 10/100 Mbps Auto-negotiation for UTP port.
„ One Single-SC Style Single-Mode Connector for 100 Base- FX fiber
cable.
„ Fiber cabling connectivity up to 20Km.
„ Uses store-and-forward switching architecture.
„ 4DIP-switches to set the operation mode and Link- Lost-Forwarding
function.