Mini Tec MTB2 Kit - Manual (Page 4)

4
Additional Parts Needed:
- Honda B Series Engine/Transmission (See List)
- Coil-Over Shocks
- Front Disc Brake System: Mini Tec’s Superbrake, Mini 8.4” Disc Brakes, Other…
- Wheels with a –7mm Offset to the outside (needed for turning radius clearance) or wheel spacers
- Honda Engine and ECU Wiring Harness’
- Modified Honda ECU – OBD1
- Electronic Speedometer (Mechanical Gauges may not work with the Honda Engine)
- Honda Civic Radiator or Mini Tec’s MTB2 Aluminum Radiator Kit
- Honda Shifter
Preparation
Step 1: Remove stock Mini engine and sub-frame. Then remove everything else in
the engine compartment.
Step 2: Remove inner fenders: Cut and remove both inner fenders as shown. You will
need this extra space for the width of the subframe.