MK Products Prince XL MM Com ACWC - Manual (Page 13)

Prince ® XL Millermatic Compatible Gun Owner's Manual - Page 6
Barrel Assemblies
Optional 6”, 12” and 18” Straight and Curved
Barrel Assemblies
6” Curved, 45°, Water Cooled Barrel Assembly 300 Amps ............... 003-2381
6” Straight Water Cooled Barrel Assembly 300 Amps ....................... 003-2380
12” Curved, 45° Water Cooled Barrel Assembly 400 Amps............... 003-2319
12” Straight Water Cooled Barrel Assembly 400 Amps ..................... 003-2318
18” Straight Water Cooled Barrel Assembly 400 Amps ..................... 003-2320
18” Curved, 45° Water Cooled Barrel Assembly 400 Amps............... 003-2321
12” Flex Air Cooled Barrel Assembly, 200 Amps .......................... 003-2495-12
18” Flex Air Cooled Barrel Assembly, 200 Amps .......................... 003-2495-18
24” Flex Air Cooled Barrel Assembly, 200 Amps .......................... 003-2495-24
36” Flex Air Cooled Barrel Assembly, 200 Amps .......................... 003-2495-36
Optional Kits
Insulated drive roll kits are used to prevent preheating of the wire which may
soften it and clog the liner. This picking up of current at the drive rolls rather
than at the contact tip is usually not a problem unless using too large of a
contact tip or excessively oxidized aluminum wire.
Insulated Groove Drive Roll Kit ...................................................... 005-0715
For .030" (0.8mm) dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Insulated Groove Drive Roll Kit ...................................................... 005-0716
For .035" (0.9mm) dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Insulated Groove Drive Roll Kit ...................................................... 005-0717
For .040" (1.0mm)dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Insulated Groove Drive Roll Kit ...................................................... 005-0718
For .045" (1.2mm) dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Insulated Groove Drive Roll Kit ...................................................... 005-0719
For .062" (1.6mm) dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Prince
XL Millermatic Compatible Handle Kit ............................... 005-0633
Includes left and right handle with door, trigger and pin,and all
handle screws.
Barrel Insulator Replacement Kit ................................................... 005-0696
Optional Accessories
Conduits
Flat Spiral Steel Conduit for steel and cored wire. Standard with teflon
liner.
300 Amp
Water Cooled
(P/N 003-2380)
Optional on WC
450 Amp
Water Cooled
(P/N 003-2315)
Standard on WC
225 Amp
Air Cooled
(P/N 003-2330)
Standard on AC
225 Amp
A/W Cooled, 45°
(P/N 003-2152)
Optional on AC
450 Amp
Water Cooled, 45°
(P/N 003-2316)
Optional on WC
200Amp
Air Cooled Only
(P/N 003-2495-12)
Optional on AC